Amkette Drive 2-in-1
Wireless CarPlay & Android Auto Adapter
Updated on
Additional Resources
Product Manual
Troubleshooting
The adapter is not connecting wirelessly. What should I do?
• Ensure your car supports wired CarPlay or Android Auto
• Confirm Wi-Fi is enabled on your phone
• Check Bluetooth pairing with “Amkette Drive”
• Restart the car infotainment system and retry
Audio or navigation feels unstable.
• Ensure the phone remains within the car cabin
• Avoid switching networks during use
• The device performs best on the 5.8 GHz Wi-Fi band
The adapter is not detected by the car.
• Try switching between USB-A and USB-C connectors
• Confirm the USB port supports data, not charging only
DriveCast is not connecting. What is the most common reason?
Drive works only when plugged into the car’s OEM wired CarPlay/Android Auto USB data port, not a charging-only port. Ensure it is connected to the same USB port used for wired CarPlay or Android Auto.
Why does Drive connect and disconnect randomly?
The most common cause is an incorrect USB port or unstable USB data/power.
• Plug Drive into the OEM USB port that supports wired CarPlay/Android Auto.
• If multiple ports are available, try the other infotainment USB data port.
• Avoid using USB hubs, splitters, extensions, or converters during setup or troubleshooting.
Why does the connection drop in certain locations?
• Wireless CarPlay/Android Auto relies on a Wi-Fi link after pairing.Keep the phone closer to the head unit (dashboard area).
• Turn off hotspot or Wi-Fi sharing on the phone while using Drive.
• If the issue occurs only in specific locations (such as basements or dense traffic zones), reconnect once after moving away from that area.
The problem started after a phone software update. What should I do?
Phone updates may reset wireless permissions or pairing behavior.
• Restart the phone once.
• Perform a Forget & Re-Pair using the Clean Reset method.
How do I perform a Clean Reset on Drive / Drive S1?
Follow these steps to rebuild the pairing from scratch:
1. Unplug Drive from the car’s USB port.
2. On your phone:
• Forget “Drive” from Bluetooth.
• If it appears in saved Wi-Fi networks, forget it there as well.
• On iPhone, also remove it from CarPlay if it appears under your car’s CarPlay profile.
3. Plug DriveCast back into the OEM wired CarPlay/Android Auto USB data port.
4. Open Bluetooth and pair with Drive.
5. Tap Allow / Pair / Use CarPlay / Enable Android Auto on all prompts.
After completing these steps, DriveCast should connect normally
Product Overview
What's in the box?
The box contains:
• 1x Amkette DriveCast Wireless CarPlay & Android Auto Adapter
• User Manual
What are the key features of Amkette Drive?
• Converts wired Apple CarPlay and Android Auto into fully wireless connectivity
• Wi-Fi 6 (AX1800) for fast, low-latency in-car performance
• Operates on the 5.8 GHz band to avoid signal interference
• Dual USB-A and USB-C connectors for broad vehicle compatibility
• Bluetooth 5.4 for quick pairing and stable handoff to Wi-Fi
• Ultra-compact 12 g design for hidden, clutter-free installation
• Premium aluminum + ABS construction for durability and heat control
Quick Setup Guide
How do I set up Amkette Drive for the first time?
• Plug the adapter into your car’s USB-A or USB-C port
• Enable Wi-Fi on your smartphone
• Pair via Bluetooth when “Amkette Drive” appears
The device reconnects automatically on future drives.
Do I need to install any apps?
No. Amkette Drive works without any additional apps or software.
How long does the setup take?
The initial setup takes only a few seconds.
How does wireless CarPlay and Android Auto work on this device?
The adapter first pairs via Bluetooth and then switches to a high-speed Wi-Fi 6 connection to deliver smooth navigation, calls, music, and messaging.
Why does it use the 5.8 GHz band instead of 2.4 GHz?
The 5.8 GHz band is less crowded inside vehicles, reducing interference and improving reliability.
Features and Customization
Will the adapter be visible after installation?
No. The ultra-compact 12 g design stays discreetly behind the dashboard, keeping the cabin clean and clutter-free.
What materials are used in the build?
The adapter features an aluminum top shell with an ABS bottom for improved durability, heat dissipation, and long-term reliability.
Does it heat up during extended use?
No. The device is designed to operate reliably in temperatures ranging from –20°C to +70°C.
Power Management
How is Amkette Drive powered?
Amkette Drive draws power directly from your car’s USB-A or USB-C port. No internal battery or external power source is required.
Does Drive turn off automatically when the car is switched off?
Yes. The adapter powers on and off with the car’s USB system, ensuring it operates only when the vehicle is in use.
Is continuous plug-in use safe for long drives or daily usage?
Yes. The ultra-efficient design, aluminum + ABS construction, and wide operating temperature range (–20°C to +70°C) ensure stable power handling and reliable performance during extended use.
Compatibility
Which cars are supported?
Amkette Drive works with any car that has wired Apple CarPlay or wired Android Auto via USB-A or USB-C.
Does it support both Apple CarPlay and Android Auto?
Yes. A single adapter supports both platforms seamlessly.
Does it support OEM controls?
Yes. Steering wheel controls, touchscreens, knobs, and factory buttons continue to work normally for an OEM-like experience.
